Hi

So a stone happily trashed my windscreen and 2 weeks ago AutoGlass (through my insurers Admiral) replaced the windscreen, two issues were noticed immediately upon next drive:

1) Rattling from driver's piller when at "motorway speeds"

2) Automatic rain sensors don't respond to rain and now simply functions as an always on intermittent wiper (set it to auto and it ignores windscreen water and simply does an intermittent wipe until switched off, dipped lights also seem to come on randomly in full daylight)

Contacted Autoglass and today a team arrived to resolve:

a) Rattling was broken / missing trim fixing clips - which they noticed and have replaced (yet to test at high speed though)

b) They can't seem to find any causes but agree it's not working - have left recommending that they order and fit a new senor

So, I'm not that impressed given that they didn't already have a replacement sensor to fit, but I also suspect that isn't the issue and that it might have something to do with the windscreen is no longer badged as a "Land Rover Pilkington E1 43R-001588" official windscreen that was installed, but rather now a "Shatterprufe E11 43R-00089"

Does anyone else have any experience with these windscreen types at all?

I can see from this thread that it looks like an invalid screen type https://www.fullfatrr.com/forum/topic57909-15.html

Cheers

Ian

Click image to enlarge

feel your pain. this thread has inspired me to check screen type and connections.

The screen finally fitted was third attempt.
Windscreen wiper intermittent selection - does not work. Changing the delay interval stimulates one wipe only.
Windscreen wiper- rain sensor wiping - does not work.

Paintwork is still damaged 2004 L322 BMW 4.4v8 petrol/lpg
2006 m139 QPv
2001 3200GT
2001 mx-5
2001 728iL
1967 Rover 2000TC

When I had my L322 windscreen refitted at the dealership by autoglass they simply forgot to refit the connector to the sensor, had to go back to the dealership for them to reconnect it, could be something as simple as that ? 2021 P400 Silicon Silver AB
Gone 2011 Bournville TDV8 VSE
Gone 2008 Black Canadian HSE LUX

They say they fully checked the connections & pins today - now waiting for Autoglass warranty dept to contact me (already called their customer services and advised they fitted a non-original windscreen and the number of issues reported with those)

My own screen is Branded LAMISHIELD 43R-000738
Sent email to fitting company a few hours ago - about the ongoing issues. Just had phone call and they are sending out a fitter Monday. Might save me a job.

Click image to enlarge

Mine didn’t work either. I ordered a replacement sensor. While I was awaiting its delivery, I read the notes on my Faultmate help page and saw it mentioned recalibration.

I ran the recalibration and it worked. Umm, anyone need the sensor I bought?  Ron B. VK2OTC
2003 L322 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA

jez000 wrote:

When I had my L322 windscreen refitted at the dealership by autoglass they simply forgot to refit the connector to the sensor, had to go back to the dealership for them to reconnect it, could be something as simple as that ?

If it's anything like a BMW, with sensor d/c or faulty, the wipers revert to standard intermittent wiper operation. 2012 (L322) 4.4TDV8 Vogue SE, RSE, Fuji White over Arabica.
Previous V8s: BMW 645Ci, P38 4.6, P38 4.0, Merc CL500
Previous others: Honda x1, Volvo x7, Rover x6, BMW x6, Ford x1, Mercedes x2, Skoda x3, VW x2, Renault x2, Citroen x1, Mazda x3, Nissan x1, Audi x3, Kia x1, Fiat x4, Subaru x3, Austin x2, Triumph x2, Jeep x2, Hyundai x2, Lexus x1, Mitsubishi x1, Saab x2... and some others I've forgotten!