Does the RAC interface also reset the Air Supension if required? My thinking is that if it does I may sell my reset interface that I brought from RSW solutions and use the money to put towards the RAC interface instead, it looks a good bit of kit. Reformed

can someone enlighten me on this product please? i am looking to buy a diagnostic tool and was thinking of the "hawkeye" as it seems very capable and value for money.

any opinions on things greatly received. Current: TDV8 (3.6) RRS HSE



Past: TDV8(4.4) Vogue
Discovery 3 Commercial
TDV8(3.6) Vogue
TD6 Vogue
D2 V8 ES
D1 V8 ES
RR Vogue Classic

http://www.rswsolutions.com/index.php?opti...;Itemid=81


sorry gotta go, dinners ready..

thanks for that, no good to me as my VIN starts 6A!! Current: TDV8 (3.6) RRS HSE



Past: TDV8(4.4) Vogue
Discovery 3 Commercial
TDV8(3.6) Vogue
TD6 Vogue
D2 V8 ES
D1 V8 ES
RR Vogue Classic

Reformed wrote:

Does the RAC interface also reset the Air Supension if required? My thinking is that if it does I may sell my reset interface that I brought from RSW solutions and use the money to put towards the RAC interface instead, it looks a good bit of kit.

could be done i suppose..

Click image to enlarge

Thanks Scarey. I might just keep the EAS activate in the glovebox and buy this as well then to be safe. Reformed

The screen above is for EAS Calibration - which the EAS Activate doesn't do. The RAC system resets your codes just as the EAS Activate does.

The calibration screen above is still being worked on and for the moment only allows manual code input...

So yes, you could get rid of the EAS-A' but it's so handy to leave in the glovebox, mine lives there all the time. 

I'm now in the club! Mine came today, so I will connect it up when I get home and have a look. I decided to keep the EAS reset plug in the end. Reformed

There have been some major improvements in the software lately so you should get on with it fine! 

I asked the guys about a solution for >MY07 cars, but it's not looking promising.........  Got - 2017 SDV8 Autobiography in Loire Blue
Had- 2008 TDV8 Vogue SE in Java black
Had - 2007 S/C in Stornoway Grey

I am finding when I coonect to the car, if I only have the ignition on, its working, but if I start the car I keep getting the error message go red. When I click refresh I get the messege “Error opening device, reset hardware and try again”

Am I doing something wrong or do you connect with the ignition on but the car not started? Reformed

works both with just ignition on and when its running...try restarting the application when its all plugged in..