Anyone know how to remove the plastic jacking point?

 Christian.


Current Cars
2011 Range Rover Vogue SE
2020 BMW M4 Competition
2019 BMW X4

My RR Blog: www.facebook.com/L322Project
or
https://www.fullfatrr.com/forum/topic61540.html

There is a central pin to knock out then it vertually falls off the car sir

Got it off but the pin is a goner!

Got to order a replacement pair of jack pads now, £20 isn't too bad for a pair. Christian.


Current Cars
2011 Range Rover Vogue SE
2020 BMW M4 Competition
2019 BMW X4

My RR Blog: www.facebook.com/L322Project
or
https://www.fullfatrr.com/forum/topic61540.html

is this a plastic pin? and does it have to be pushed in or pulled out.
Thanks

You could try drilling a small dia hole up through the centre of the pin, screwing a long self tapping screw into it and pulling it out with a pair of pliers.

The Pin in the middle has to be pulled out - use a suitably strong trim tool as the pin is very tight in there but it does come out.

Once the pins out just manipulate the jack pad out of the sill. Gavin

2005 Range Rover Vogue SE 4.2 Supercharged V8

Follow my 4.2 Supercharged antics -
https://www.fullfatrr.com/forum/topic63354.html
https://www.instagram.com/l322_supercharged/
https://www.youtube.com/channel/UC8ChHNSdscnJarKjBLd_IAg

You will never lever the pin out. It has no head and sits flush with the jacking pad.

Either stick a screw in as said before or use a punch and drive it upward. Christian.


Current Cars
2011 Range Rover Vogue SE
2020 BMW M4 Competition
2019 BMW X4

My RR Blog: www.facebook.com/L322Project
or
https://www.fullfatrr.com/forum/topic61540.html

Get the land rover jack out the boot and start lifting the car. Jack pad should just go straight through. Problem solved haha

Thanks guys, can I have the part no's please