Home > Technical (L405) > Reversing sensor |
|
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35282 |
the most common failure of parking sensors is having moisture in them from pressure washing the car or going through deep puddles...
|
||
6th Nov 2021 11:37am |
|
dentaldave Member Since: 24 Dec 2020 Location: lincolnshire Posts: 41 |
Okay I will try that now . Presumably you mean spraying externally not behind the bumper? |
||
6th Nov 2021 11:59am |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35282 |
on the face of the sensor...i dont think its easy to get from the rear... ... - .- -.
|
||
6th Nov 2021 12:01pm |
|
dentaldave Member Since: 24 Dec 2020 Location: lincolnshire Posts: 41 |
I’ll have a go tomorrow! Working this afternoon!! |
||
6th Nov 2021 3:03pm |
|
Dave G Member Since: 30 Jul 2020 Location: Dorset Posts: 84 |
Not sure how easy they are to pop out, but if you could do that & put it in the airing cupboard it might help? 2013 Range Rover Autobiography 4.4 SDV8
|
||
6th Nov 2021 6:33pm |
|
dentaldave Member Since: 24 Dec 2020 Location: lincolnshire Posts: 41 |
Yes but have to mind those plastic seatings. Do not want to damage them. |
||
6th Nov 2021 6:41pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis