fullfatrr.com - View topic - Parallel wire to Starter solenoid switch

Advertise on fullfatrr.com »

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical (L322) > Parallel wire to Starter solenoid switch

Page 1 of 1

Print this entire topic ·

Bogi 6357

Member Since: 28 Jul 2019
Location: Scottish Borders
Posts: 54

Parallel wire to Starter solenoid switch

Hi

I’ve been having starting no crank and click issues on my
2008 TDV8 for a while , it’s had batteries , starters , etc , I decided to look at this myself ,
Long story short , I wired in a push button to the starter which works every time !
So I would like to run a parallel wire from the engine fuse box ,starter circuit , I’ve found a similar thread
Where they are tapping into the starter trigger wire which exits from the under bonnet fuse box

My question is which one is it 😀
I have attached an image of my fuse box and wires , or if you can guide me to a diagram
As I can’t find anything online

Thanks
Ian

17th Jul 2022 11:59am

AJGalaxy2012

Member Since: 11 Jun 2018
Location: Gainsborough
Posts: 1464

2012 Range Rover Vogue SE 4.4 V8 Bonatti Grey

What engine, what year etc, need specific information BMW i3 Electric Car
2012 Full Fat RR 4.4 TDV8 (now gone)
2006 VW Touareg 3.0 TDi V6

17th Jul 2022 1:10pm

Bogi 6357

Member Since: 28 Jul 2019
Location: Scottish Borders
Posts: 54

Hi yes it’s a ….year 2008 L322 3.6 TDV8
Cheers
Ian

17th Jul 2022 1:50pm

RRYorks

Member Since: 13 Jan 2020
Location: Yorkshire
Posts: 37

2010 Range Rover Vogue TDV8 Barolo Black

Are far as I can work out, you would need to intercept the wire from the Engine control unit to the relay.

Plug C0572, Pins 19 (Black/Yellow) and 25 (Red/Blue), I would assume one is earth and the other is energised by the ECU to call the relay

No warranty implied or given! use this info at your own risk

(Of course, it might be the relay which is causing the problem?) 2010 3.6 TDV8

19th Jul 2022 1:41pm

Bogi 6357

Member Since: 28 Jul 2019
Location: Scottish Borders
Posts: 54

RRYORKS

thanks for this I really appreciate the effort .
From your Diagram , it’s relay 6 , will check this myself
And the trigger or signal wire don’t know the terminology 😀 is on connector C571 red and black wire , I’ve attached an image of my fuse box with the wire I would splice another in to run to solenoid switch /trigger on starter motor

I will trace this wire back to the starter solenoid to make sure it’s the one I’m after , it would normally go to the garage
But I’m not having a 4th starter motor fitted , I measured the voltage at the starter solenoid switch/trigger wire and it was 9V
I wired in a push button start and that activates the solenoid every time 12.4 V when activated ,
Battery seems ok at 14.2 V when running ,
Kind Regards
Ian

19th Jul 2022 7:28pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum