Home > General > Will I fit a 2.4m scaffold board in the L322 |
|
|
Spud Member Since: 12 Jul 2019 Location: Asif by Magic Posts: 130 |
With ease. 2006 4.2 SC |
||
30th Jan 2021 10:29pm |
|
Jpboost Member Since: 23 Jul 2018 Location: Gatwick Posts: 72 |
a recent emergency purchase means I can confirm that you can comfortably fit a 3m length of 22mm copper into a L322.
|
||
30th Jan 2021 10:51pm |
|
Rob99 Member Since: 03 May 2016 Location: Gatwick Posts: 1377 |
And for short journeys I've had a 4m length of ali profile sticking out the back with the lower tailgate down....
|
||
30th Jan 2021 11:47pm |
|
mrblonde Member Since: 24 Jan 2012 Location: Cambs Posts: 728 |
Thanks gents, I should of ran outside last night to measure but it was too damn cold! 🥶 |
||
31st Jan 2021 3:27pm |
|
Bluespanner Member Since: 03 Jan 2021 Location: Burton up on Trent Posts: 43 |
If You move the seats forward so I can just about get in, there is about 6ft2 to the tailgate. |
||
31st Jan 2021 4:34pm |
|
bikeman Member Since: 10 Dec 2018 Location: Sydney Posts: 21 |
Just a little different. I loaded 200 bricks in the back of mine, I do have a rubber protection mat. The young guy helping me load was worried that the car was on the bump stops, I just said “watch”. The car raised to normal height and he nearly fell over. Drove back to site with no worries. |
||
6th Feb 2021 7:15am |
|
TDV8 Paul Member Since: 30 Nov 2020 Location: Tadworth Posts: 223 |
😂 that’s brilliant, I’d have loved to seen his face 2009 (2010 MY) 5.0 Supercharged Autobiography
|
||
7th Feb 2021 8:51pm |
|
LWBlloyd Member Since: 12 Feb 2021 Location: Oxford, UK Posts: 3 |
Love it. |
||
12th Feb 2021 11:40pm |
|
lschwarcz Member Since: 18 May 2019 Location: Hillsboro, OR, USA Posts: 273 |
This is good information to have... just in case. But, I'm still glad I bought a roof rack!
|
||
13th Feb 2021 5:16pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis