Hello all,

My 2015 L405 SDV8 is on 90k miles and there is a knocking from the front over small bumps (almost certainly the ACE anti roll bar bushes (ARB) again, these were done at 60k) and the front lower arm bushes are showing signs of weakening.

I plan to change the front & rear lower arms, and the ARB bushes on the basis of 'why not'.

My question is are these made by Delphi? If not who makes the OEM spec arms.

I am not inclined to spend JLR parts prices if I can get the same parts from a factor in a different box.

Thanks.