Hi all,
New to the forum and have owned my L322 since November. Love it to bits!
I've been searching everywhere to find the fuse location for the FBH on my facelift 3.6TDV8. This is to disconnect it from the battery and force a reset. I have been given lots of fuse numbers for the glovebox department e.g. 59 or 28 but they are blank... some suggest the engine bay but I can't find the fuses here and again I am not getting given a certain fuse number but lots of 'I think it is...' answers so don't want to pull the wrong one!
My remote for the FBH works fine and starts the blower but the heater is not kicking in so I want to try the reset before taking it to a specialist.
Thanks!
Sub5

Fuse 59 behind the glovebox. 2nd in from the right on the bottom row. Take out for 30 secs, put back in

Ask me how I know  09 RR Westminster 3.6TDV8 - Stornoway Grey / Black interior - now gone (sad face)
Nissan X Trail 1.6TDCi Tekna
Fiat 500 1.2

Thanks Tugger, 59 is actually blank on mine although I put a spare fuse in here and it did nothing. I'm inclined to think it is in the engine bay but not sure which one

Click image to enlarge

Very strange...should be 59. Dunno what's going on there - maybe a DIY retrofit? 09 RR Westminster 3.6TDV8 - Stornoway Grey / Black interior - now gone (sad face)
Nissan X Trail 1.6TDCi Tekna
Fiat 500 1.2

It's definitely a factory option as it comes up on the cars spec when searching the VIN code. I think the issue is when the car was facelifted (as mine is) the fuse for the FBH moved to the engine bay.

I guess you can get the same result by disconnecting the battery for 30 secs or so, that should do the trick.

Alternatively, it can be reset via diag tool such as Gap IID - if you dont have one, they are highly recommended round here. Expensive initially, but they pay for themselves very quickly and hold their value well on resale. 09 RR Westminster 3.6TDV8 - Stornoway Grey / Black interior - now gone (sad face)
Nissan X Trail 1.6TDCi Tekna
Fiat 500 1.2

Hi, I have a 2010 3.6 and the FBH fuse is in the boot, can’t remember which fuse it is but it should say on the panel when you remove the cover.

Thanks I'll have a look there. I have a feeling that is for the Webasto receiver but could be wrong!

I just unplugged the unit in the boot as it’s very accessible

I think unplugging this just terminates the receiver for the key fob and may lead to having to pair the fob again. I need to disconnect the actual FBH itself... No guarantee this will work of course!

plugging into to diagnostic would be Easier

On the facelift models the fuse for the FBH is under the bonnet, can't remember which number but there is a picture guide thing on the lid. 2010 3.6TDV8 Stornoway Grey/ Black interior - gone
2005 4.4V8 (M62) Bonatti Grey/ Parchment interior - gone
1998 4.6HSE Blue/ Cream interior (can't remember exact colours) - gone
1977 White - gone (should have kept)

It's E8, I believe. 2010 4.4 TDV8 Vogue SE