Obviously going to need to release the electronic hand brake in order to remove the discs, but I don't have a diagnostic tool. There must be a way to do this, can you just manually release the EPB and leave the ignition on for the few mins it takes to change discs? Drives:
2010 FFRR TdV8 Vogue - Stornoway Grey
2010 FFRR TdV8 Vogue SE - Zermatt Silver
1998 BMW E36 M3 GTII

I just left the electricity handbrake off when doing mine? The EPB may need to be calibrated after the new brakes fitted - I didn’t but it now flashes sometimes.

Also be sure you have a safe way of stopping at EAS adjusting itself when you jack up 1995 4.6 v8, green/tan (long gone)
2005 4.8iS X5, blue/black
2011 4.4 tdv8, black/black (gone)
2003 3.0d X5, Oxford green/black/manual
2021 p575 SVR, BR green/vintage tan

Thanks coopss , usually leave tailgate open. Drives:
2010 FFRR TdV8 Vogue - Stornoway Grey
2010 FFRR TdV8 Vogue SE - Zermatt Silver
1998 BMW E36 M3 GTII

Job completed yesterday with no issues, really easy, other than I've discovered my o/s rear caliper is siezed, grrrr! Drives:
2010 FFRR TdV8 Vogue - Stornoway Grey
2010 FFRR TdV8 Vogue SE - Zermatt Silver
1998 BMW E36 M3 GTII