Just changed both front sidelight bulbs. First time I've had occasion to change any bulbs and, whilst doing this, I found that some id10t had not bothered to replace either lower headlight cluster securing bolt.

I assume that the missing bolts are the same as those used to fix the top of the headlight cluster. They are 10mm Hex headed, coarse thread with a tapered end (like a self-tapper but with a bolt head).

Does anyone happen to know any part number or purchasing source for these bolts please?

Many thanks.

Toolstation https://www.toolstation.com/techfast-hexwa...gJi_vD_BwE

Do yourself a huge favour, go onto that well known auction site and look up ''hex head self tapping screws stainless) buy a selection including washers and it will make your life so much easier. BMW i3 Electric Car
2012 Full Fat RR 4.4 TDV8 (now gone)
2006 VW Touareg 3.0 TDi V6

Thanks both.
@ AJGalaxy2012: That's a good idea. I've had a look but I'm getting confused with the A2/M5/M3 etc. etc.

Anyone know which ones I should go for?

Definitely not a self-tapper !
I think the actual fasteners should be cross head screws with an integrated washer - M6 standard thread x approx 15mm long
I can't remember mine having an external hex head as well as the cross head screwdriver drive, but its possible as my memory isn't great - lol
You may find Halfrauds have a M6 x 15 or 20mm long cross head screw in their small packets Paul,
2001 Discovery 2 TD5, 211,000 miles & climbing
2006 FFRR TDV8 Vogue 151,000 miles & now sold
Member of Midland (Land) Rover Owners Club, www.mroc.co.uk