Hi All, I want to get my 4-wheel aliment done on a Hunter Machine as I have outside wear to one of my rear tyres had new bushes fitted, toe arm etc. I have looked through the menus on my IID Tool and can't fine where you set TTM found Transport mode but no TTM .Could some one point me in the right direction
Thanks
Peter 2003 TD6

Think you will find you can't get it into TTM on the 2002-2005 L322's only the later ones... Pete

__________________________________________________
2014 L405 Autobiography SDV8 4.4 Loire Blue Ebony interior
2011 L322 Vogue SE 4.4 TDV8 Baltic Blue. Parchment over Navy Interior. Sold
2012 L322 Autobiography 5.0 Supercharged Ipanema Sand, Jet Interior. Sold
2002 L322 Vogue 4.4 V8 Epson Green, Ivory over Aspen Interior (Fatty Offroader) Sold
-Click for Project Fatty off roader-

Agreed. Just set the car in Normal ride height (do this before going on "the ramp") so that it is settled, and then leave a door open (not the tailgate) to stop the suspension moving whilst the alignment is done. Well , that is what I did. .
Experience is the only genuine knowledge, but as time passes, I have forgotten more than I can remember
Volvo V70 P2 2006 2.4 Petrol 170bhp Estate SE
MG Midget Mk1 1962

Previous: L322 Range Rover TDV8 3.6 2008; L322 Range Rover TD6 3.0 2002; P38A Range Rover V8 1999