So, I thought the motor was done. However, after inspecting the wiper and taking the motor off, it looks as though the wiper isn't moving properly as the teeth on spline have worn. The good news is that the motor is fine. I've attached some pictures for opinions on this. If I'm correct, can I get a replacement spline for the motor? I know I can get a new arm but don't really want to pay £60, although I know I might have to. Do I have any other options?

Click image to enlarge

Click image to enlarge

Click image to enlarge

The motor will be just fine as it is... Just replace the arm sir

Thanks for the reply. Does the spline on the motor look OK? It looks a bit worn to me.

Do you also have a link to Ebay for the correct rubber seal for the motor please? It's slightly leaking inside the car. Thank you.

Last edited by stuartj9 on 4th Apr 2020 10:40pm. Edited 1 time in total

Yes it looks a little worn but put an arm on with decent spline's and im sure it will work fine sir

o you also have a link to Ebay for the correct rubber seal for the motor please? It's slightly leaking inside the car. Thank you.

Here's what I'd do to find the seal.

Go to http://new.lrcat.com

Find the part number for the seal - in this case it looks like it's DYA000010 (http://new.lrcat.com/#!/12119/101499/102939/8152/103023 assuming I've got your car right).

Stick DYA000010 into your favourite search engine.

Your welcome

Thanks Stu, that's a great site for parts - bookmarked! It's the wrong seal though. I need the one that connects to the motor and water pipe. This is where it's leaking from. Cheers

https://www.fullfatrr.com/forum/topic9792.html

Have a look on here? There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
Fiat 500x 1.4 multiair Lounge 2015
2010 LR D4 Commercial 2.7 TDV6

Cheers. I used the link on there but looks to be gone from Ebay. There's others but I need to get the correct one. I also need the self tappers.

All sorted. Spline cleaned with a blade, wiper arm sanded and resprayed and arm now back to the correct position Thanks to everyone that helped.

Click image to enlarge