fullfatrr.com - View topic - Rear arch/ bumper repair DIY

Advertise on fullfatrr.com »

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Mods (L322) > Rear arch/ bumper repair DIY

Page 1 of 1

Print this entire topic ·

Henda

Member Since: 02 Aug 2018
Location: Gateshead
Posts: 282

2006 Range Rover Vogue TDV8 Zambezi Silver

Rear arch/ bumper repair DIY

So decided to have a go at repairing and painting the rear arch and a bumper scuff on the drive using spray cans
Bumper off left the mud guards on as I was working alone and wanted something to support the big heavy bumper a few 10 mm around the arches and 10 -8mm bolts at the back 5 up 5 down and off came the flimsy light bumper
So now the job begins
I needed to get rid of this

80 grit some filler and kurust I ended up here

It was then all flatted off and primed and masked off ready for paint

Base coat and clear added ending with this

Now came the bumper scuff

Flatted off primed painted and clear coated

Refitted everything and it just needs polished and waxed
All in all it's not perfect but I think it looks

a lot better and now everything is back in placed I may even do it again as one complete job and iron out the imperfections
[img]http://www.fullfatrr.com/gallery/albums/userpics/19882/normal_IMG_0494.JPG[/img

14th May 2019 7:33am

Bradders

Member Since: 03 Dec 2018
Location: Gods own country
Posts: 417

2012 Range Rover Westminster TDV8 Zermatt Silver

Nice one. Looks so much better now and hopefully you've stopped the rot spreading any further. Current: FF Westminster money pit

Gone:
RRS 4.2 SC
RRS 3.6 TDV8
FL2 TD4

14th May 2019 8:10am

Henda

Member Since: 02 Aug 2018
Location: Gateshead
Posts: 282

Cheers it just needed doing , was getting on my wick

14th May 2019 9:16am

jaysta10k

Member Since: 24 Aug 2017
Location: Cheshire
Posts: 294

2014 Range Rover Vogue SE SDV8 Santorini Black

Hi nice job but I have had a similar issue with both rear arches that started to show signs of bubbling paint. This is a common issue with the L322 as they rot from the inside out due to a crap design the water and debris gets trapped under the inner wheel arch lip hence why they eventually rot from the inside out. I have had all the rot cut out of mine as this is the only way as I had mine rubbed down and treated on 2 occasions which only lasted a matter of months so complete waste of time and money. Range Rover Vogue SE 4.4 SDV8 SVO Stying Pack
Audi A4 2.7 TDI S Line Black Edition phantomn black
Previous Cars
Range Rover Vogue SE Overfinch Styling 22" Elara's full black stealth colour coded
Java black Range Rover sport 2.7 TDV6
Alaska white Range Rover sport overfinch 3.6 TDV8
BMW M3 Carbon Black

14th May 2019 11:50am

Henda

Member Since: 02 Aug 2018
Location: Gateshead
Posts: 282

Gave it a good clean behind there not as much crap as I thought , will see how long it lasts as I am looking for a mig welder so that could be my next adventure

14th May 2019 2:55pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum