Home > Maintenance & Mods (L322) > door sill protection |
|
|
dazza1983 Member Since: 19 Feb 2019 Location: southampton, hampshire Posts: 529 |
What do peepes think of these?
|
||
3rd Mar 2019 12:13pm |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35332 |
i used a strip of car vinyl wrap..lasts a fair while and can be easily taken off or replaced... |
||
3rd Mar 2019 12:23pm |
|
mjdronfield Member Since: 04 Nov 2011 Location: Derbyshire Posts: 7803 |
I have put those on both of the L322’s I’ve had. Never had an issue.
|
||
3rd Mar 2019 12:45pm |
|
dazza1983 Member Since: 19 Feb 2019 Location: southampton, hampshire Posts: 529 |
Just ordered a set of these. Thanks buddy.
|
||
3rd Mar 2019 1:28pm |
|
mjdronfield Member Since: 04 Nov 2011 Location: Derbyshire Posts: 7803 |
Fit is excellent. Only thing I say is put each one where you want it so you can visualise where it’s going, as to get the curve edge of the plate tight to the curve of the body, the flat opposite end will be tucked under the rubber seal on the car.
|
||||||||||||||||
3rd Mar 2019 1:54pm |
|
mjdronfield Member Since: 04 Nov 2011 Location: Derbyshire Posts: 7803 |
https://www.fullfatrr.com/forum/topic12041.html?highlight=sill 2011 Range Rover Vogue SE 4.4 TDV8
|
||
3rd Mar 2019 1:58pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis