Hi All,

I recently purchased a lovely L405 AB and had the selling (LR) garage install a tow bar.

Apparently, the only way to know if the reversing camera has the (non-retrofittable I am told) tow assist software is to position three dot sticker on the trailer and see if the additional questions about trailer axles, dimensions, etc. come up.

Can anyone send me the dimensions of the black dots and their spacing so I can have a bit of a play this weekend, please?

Thanks in advance

W.

This is a link to a pdf I was given to get my own printed for my Discovery, in the end I didn't use it as somebody gave me a spare one they had so no guarantees on how accurate it is

http://www.fullfatrr.com/gallery/albums/us...sist_2.pdf Cheers Ian
--------------------
Kielder 4x4 Safari

Thanks Ian - I shall see how I get on.

(when printed, the dots measure 80mm in diameter and at 100mm centres, 120 degrees apart) 2017 - L405 SC - WOW! just WOW!
2014 - L405 4.4
2010 - L322 3.6 - Carried me 100,581 miles then broke big-time

There are 10 types of people in this world;
Those that understand binary,
and those that don't.

I'll get back onto the lad that gave it to me and see if he has any measurements, the original part number was LR021589  Cheers Ian
--------------------
Kielder 4x4 Safari

He's just emailed me back and said the circles should be 75 mm diameter and 93 mm circle centre to centre. He also sent a powerpoint file but unfortunately my printer is refusing to work at the moment. http://www.fullfatrr.com/gallery/albums/us...sist_2.ppt Cheers Ian
--------------------
Kielder 4x4 Safari

Thanks Ian - I now have a variety of print-outs to test over the weekend! 2017 - L405 SC - WOW! just WOW!
2014 - L405 4.4
2010 - L322 3.6 - Carried me 100,581 miles then broke big-time

There are 10 types of people in this world;
Those that understand binary,
and those that don't.