Hello all,

I have to remove the right side panel to access to the servo motor which is not good.
Attached to the panel I have this box with connections and 2 empty comunications ports RJ45.
Can someone enlight me?
My Vogue was equuiped by the previous owner with bluethoot for fhone by Bimmernav.
Cheers

Click image to enlarge

That's a Nokia CARK box Sir

The larger port was for the cradle -- I can't remember what the smaller port did

Bimmer used to sell ULF conversion kits, nothing to do with that box, though obviously the Nokia is a bluetotth kit! Current: 2011 FFRR Vogue SE 4.4 TDV8
Previous: -
2004 FFRR Vogue 4.4 V8 with LPG
1997 P38 4.0 SE with LPG
1997 P38 4.6 Vogue with LPG

This plug with several cables was disconnected. Now I've connect it. Will it interfere with the ULF? Is this Nokia system better than Bimmer's ULF? This ULF is really tricky to pair with and hears quite badly when chatting and does not store the contacts.
Thank you

All of the questions you ask are subjective!

I fitted ULF in my 2004 -- no problems at all

I also had CARK in previous cars -- no problem at all

The CARK won't interface with a ULF, totally different systems.

The ULF does store contacts -- are you aware that there are 13 different hardware versions of UFL, have a dig around in the for sale section (H-hum) there are a couple for sale

Hope that helps Current: 2011 FFRR Vogue SE 4.4 TDV8
Previous: -
2004 FFRR Vogue 4.4 V8 with LPG
1997 P38 4.0 SE with LPG
1997 P38 4.6 Vogue with LPG