fullfatrr.com - View topic - What are these connectors

Advertise on fullfatrr.com »

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical (L322) > What are these connectors

Page 1 of 1

Print this entire topic ·

drakes

Member Since: 26 Jan 2009
Location: Consett
Posts: 370

2010 Range Rover Vogue TDV8 Stornoway Grey

What are these connectors

This is in the spare wheel well anyone tell me what it is?

There are 2 of these, one in each raer wheel arch and they plug into what appears to be a small holder so I assume they are for something I don't have. The 1 in the drivers side wheel arch is behind the plastic liner and not visible until you take the liner out but the one on the passenger side is on the wheel side of the liner so exposed to everything the wheel throws up.
Firstly what are they and secondly should they both be behind the liner if so I will move the passenger one.

Thanks

Keith

10th Oct 2018 11:31am

Martin
Site Admin

Member Since: 24 Mar 2007
Location: Hook Norton
Posts: 1665

TPMS "initiator" connectors

10th Oct 2018 11:50am

rjff

Member Since: 28 Oct 2017
Location: Cambridgeshire
Posts: 1196

2011 Range Rover Vogue TDV8 Santorini Black

I think the first picture of the sensor in the spare wheel well is an accelerometer for the active suspension.

Find beer, open, sit down and have a look at this

http://www.fullfatrr.com/forum/topic47371....elerometer Cheers
Richard

(there are no such things as an ordinary FullFat, an ordinary cat or too many tools)
2011 TDV8 Vogue Santorini Black
Gap IIDBT

10th Oct 2018 5:59pm

drakes

Member Since: 26 Jan 2009
Location: Consett
Posts: 370

Martin, have no TPMS so presume this is just the wiring ready if it had been specced.

I did not know I had active suspension, when did it become standard on Vogue spec or was it an option that was picked when new. I assume that the accelerometers would only be installed if the active suspension was also fitted and it is not there in the same way as the TPMS wiring.

Keith

10th Oct 2018 8:00pm

rjff

Member Since: 28 Oct 2017
Location: Cambridgeshire
Posts: 1196

Keith

Can't really answer, but it may be that active or whatever suspension was introduced on the 2011MY.

If you can obtain the build spec for your car it may tell you if the active suspension was fitted when built. Would expect it to be next to impossible to retrofit. Spec may be obtainable via the customer relation thread section by asking the current rep.

Have a search on here and I think that the active bit has wires coming out of the top of the struts, easily seen under the bonnet. The thread I pointed to also has the position of the sensors noted somewhere.

Enjoy your beer Cheers
Richard

(there are no such things as an ordinary FullFat, an ordinary cat or too many tools)
2011 TDV8 Vogue Santorini Black
Gap IIDBT

10th Oct 2018 8:29pm

GraemeS

Member Since: 06 Mar 2015
Location: Wagga area
Posts: 2485

2012 Range Rover Autobiography TDV8 Bournville

The accelerometer is for the CVDs which was optional on MY10 and standard on MY11/12.

10th Oct 2018 9:34pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum