but everything is working just fine , this started happening yesterday , any ideas guys ?

Poor/intermittent contact and/or filament broken on sidelight. I've had this on every single one we've had at one time or another and it's either been the bulb itself or the bulb holder contacts.

Canbus errors due to LED lights ? .
Experience is the only genuine knowledge, but as time passes, I have forgotten more than I can remember
Volvo V70 P2 2006 2.4 Petrol 170bhp Estate SE
MG Midget Mk1 1962

Previous: L322 Range Rover TDV8 3.6 2008; L322 Range Rover TD6 3.0 2002; P38A Range Rover V8 1999

its not miss behaved today at all , most be the time of the month , my LEDs are wired into the fusebox Joe90 so it cant be that pal lol

I have put some Osram LEDs in mine and I kept getting the error despite the fact that they're meant to be CanBus error free. After messing about with the contacts for a while, I just decided to turn of the hot monitoring and cold monitoring to the bulb in the CCF. Love the IID Tool!

Therefore it has nothing to do with the lights, but the wiring that used to be connected to them ? Helps when you get a full description of the issue

Is the original wiring properly isolated, and IIRC you can turn off the hot monitoring (unfortunately on your model not the cold monitoring IIRC) on the sidelights, which may prevent recurrence. .
Experience is the only genuine knowledge, but as time passes, I have forgotten more than I can remember
Volvo V70 P2 2006 2.4 Petrol 170bhp Estate SE
MG Midget Mk1 1962

Previous: L322 Range Rover TDV8 3.6 2008; L322 Range Rover TD6 3.0 2002; P38A Range Rover V8 1999