OK so that's got your attention!!

P040D-00 (2F) Exhaust gas recirculation temperature sensor A

Right after Greg successfully managed to change his sensor he noted you need a special tool -- now I intend to do the job at some point and he kindly made the tool available to purchase -- I've bought it !!

But as this is likely to be a one use tool I thought it might be useful to 'hire' it out to other forum members -- so here it is -- I'll likely charge you the cost of a new tool + postage to you as a deposit + a small donation to the site -- you send it back to me and I'll credit you the price of the tool minus the carriage to you.

That all make sense?

Cheers

Bushy Current: 2011 FFRR Vogue SE 4.4 TDV8
Previous: -
2004 FFRR Vogue 4.4 V8 with LPG
1997 P38 4.0 SE with LPG
1997 P38 4.6 Vogue with LPG

Last edited by Bushy30 on 25th Jan 2019 9:39pm. Edited 1 time in total

Might want to share which tool it is and which sensor you are referring to sir...

Greg will confirm, but you need to stress to whoever uses the tool it MUST NOT be used to remove the old sensor, but only to fit the replacement new sensor., otherwise it will spread and become useless.
Mike. G reg 2.5VM Vogue Portofino red 1991- 1999
V reg 2.5td P38 Rioja red 1999- 2006
53 reg td6 Vogue Oslo blue 2006- 2015
11 reg 4.4 TdV8 Vogue SE. Baltic blue 2015- date.
https://www.fullfatrr.com/forum/topic56162...tty+affair

Thanks chaps, edited, and yes more info from Greg soon about all the wrinkles, most are covered in his write up, which he has promised to condense for the wiki  Current: 2011 FFRR Vogue SE 4.4 TDV8
Previous: -
2004 FFRR Vogue 4.4 V8 with LPG
1997 P38 4.0 SE with LPG
1997 P38 4.6 Vogue with LPG