Hi All

Have a 03 L322 with the dreaded sagging headlining.
I understand that the headlining and backing has to be removed from the vehicle the material then stripped and then a new material glued to the backing and re installed.
I wondered if there were any videos or photos showing the process.
And could anyone recommend where to Purchace the cloth.

Cheers

You can purchase complete kits for P38 range Rovers online, including on eBay.
Might be worth checking with the sellers if they offer this for L322
keep us posted please  l=Oo\________/oO=l l:OolΞΞΞΞΞΞΞloO:l

Current
RANGE ROVER Vogue 4.4L SDV8 - 2013 - Indus Silver, on Almond.
RANGE ROVER Vogue 4.4L V8 - 2002 - ex-2003 G4 Challenge Event Vehicle, Stage 3: Australia
RANGE ROVER HSE 4.4L V8 - 2004 - one-of-one Overfinch
RANGE ROVER P38a 4.0L V8 - 1999 - ex-2000 TReK Event Vehicle: South Africa

Previous:
RANGE ROVER Vogue 4.4L TDV8 - 2012 - RANGE ROVER 3.6L TDV8 x3 - RANGE ROVER Td6 x1 - RANGE ROVER Classic 3.5L V8 x1

I have done quite a few Range Rover head linings, just bought generic cloth online and used 3m spray adhesive. The last one I did on my current car I used microsuede fabric and plain PVA glue. Still good after 3 1/2 years 2007 TDV8 VSE
2003 TD6 gone.
2002 P38a gone
1999 P38a gone
1997 p38a gone
1993 VSE gone
1992 VSE gone
1966 Series 2a with V8 conversion gone

This is quite a common problem with the d2.
If you head over to thed2boysclub.co.uk
There are a few write ups, some have used black cloth which looks really nice Remember:- amateurs built the ark
Proffesionals built the titanic