Thinking about buying the 2012 rear lights from powerfulluk already got the other parts that are needed,just wondering if there are any other options out there or if any of you have used them they look good for £300

Does that price include the two circuit boards and the new grommets required? You will have to drill some holes and grind off some sticky out bits.

You will get fast flashing indicators on first use, message centre issues about taillights, maybe a disco on startup.

Otherwise they look good  .
Experience is the only genuine knowledge, but as time passes, I have forgotten more than I can remember
Volvo V70 P2 2006 2.4 Petrol 170bhp Estate SE
MG Midget Mk1 1962

Previous: L322 Range Rover TDV8 3.6 2008; L322 Range Rover TD6 3.0 2002; P38A Range Rover V8 1999

I already have the boards and grommets 👍 had them a while I got the boards when the lights were playing up but turned out to be the bloody dsp,bm54 and Lcm that had water damage and causing battery drain 🙈🙈

What boards do you have? The early ones still required extra resistors to stop the hyper flash. Powerful’s newer boards seem to have fixed the need for the extra resistor.. the disco lights can be resolved by turning off rear bulb monitering 👍

That’s the newer ones. All good then 👍