Hi All,
After having a split top intercooler hose replaced recently i thought i would buy a silicone hose set.
I have managed to change the top ones no problem and passenger side doesn’t pose a problem but the drivers side lower looks like there’s a few other things to move out of the way to get to the upper clamp and actually remove it.
I have removed both under trays but cant see my way through it yet.
For those that have tackled and sorted please let me know the best way.
Remove parts above or get at from below? What else has to move or be removed.

Thanks
Jon Jon
2009 3.6 TDV8 Vogue SE
Previous Land Rovers
Series 2 Land Rover petrol - loved it and want another
Range Rover classic v8 - loved it But glad i sold it
Series 3 Land Rover - Steering lottery But useful.
Land Rover v8 90 - Fast dirty & drank Fuel like a Boeing 737.

Did you manage to fit them? 2010 MY Vogue SE TDV8 3.6 Stornoway Grey- fully loaded

Didn’t fit them in the end. Too much to take off to get to them. It hasn’t been a problem but will try again at some point. Jon
2009 3.6 TDV8 Vogue SE
Previous Land Rovers
Series 2 Land Rover petrol - loved it and want another
Range Rover classic v8 - loved it But glad i sold it
Series 3 Land Rover - Steering lottery But useful.
Land Rover v8 90 - Fast dirty & drank Fuel like a Boeing 737.