Hi all
done over 2k in my new range rover and its magical, runs like a dream and the 4.4 engine is a little throaty but pulls like a train!
Any way, went to change the sim card and the new one wont stay in the slot, you push it in and its springy but wont stay in, any advice as to what i am doing wrong would be welcome.

Nigel

Normally you have to push it in a little beyond the spring resistance of the slot to engage the catch, but it always struck me as being a little bit flimsy, which I noted when I inserted mine.

hi, yes tried that it just wont stay in

i will ring dealer

I had this issue but for me it was the wrong way round
Or maybe it was the fact u had to actually buy one and fit yourself

I have tried all different ways.

It appears i did not try properly. Salesman came out and inserted correctly and it stayed in!

Oh matron lol
Glad it's sorted

Well the cards now stays in. But the car cant read the sim, error says sim card removed!
I will order another sim and try that, unless anyone has any other ideas

Thanks

I had a similar issue with inserting the card and finally went in, in my opion the wrong way around, but I think I had to do something with the setting ( think I used the small leaflet with the handbook ), also may need to swop the metal connector the other way around, try the new card first, hope this helps

New sim card bought and inserted. Still doesnt work. Says its reading card then says sim card not inserted.
Any one had this?

Nigel

Had an issue getting the right size of SIM card, but once received it did work from the off. Is the feature switched on within Incontrol? Paul

MY17 TDV6 Autobiography In Carpathian Grey With Cirrus Interior

Sim card is right size and it pushes in and stays in. From with in the incontrol system i select to turn on data and it reads sim fir about 5 minutez then says sim removed!

Put the sim in a phone or tablet to prove it works on data . My Vodafone data only sim needed this before it worked in the car.

Okay thanks. Will try that later


Nigel

Sim card still not working. Dealer niw going to replace card reader.

Hopefully that will fix it