fullfatrr.com - View topic - Electrics not going well

Advertise on fullfatrr.com »

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > In Car Electronics (L322) > Electrics not going well

Page 1 of 1

Print this entire topic ·

alfapat

Member Since: 09 Apr 2017
Location: Elgin
Posts: 349

Electrics not going well

Ok , got myself in a knot here, I have ordered and rescued a switch module fro Bimmernav to connect my reverse camera to the tv module. It's not good , I have searched the forum and links to get a clear view of what I need to do . I will try an explain.

Click image to enlarge

So A is the lead supplied by Bimmernav which has a red and black for some pin numbers I guess for TV Module , blue or white
B Large dark blue ready for another pin number.
C conjoined yellow and red , ...could be earth on ring tab.
D I think is to reverse lighting wire
E & F comes from the camera , (12v live continuous)
G is red tail also from camera ?
H finally goes to I I presume .

I'm sorry I think I have seen this better explained , but cant seem to find it . Its not hard , but I ve lost the plot !
pat

Last edited by alfapat on 9th May 2017 8:27pm. Edited 1 time in total

9th May 2017 8:01pm

Freddie The Fish

Member Since: 13 Apr 2017
Location: Bedfordshire
Posts: 115

Have you got the manual up the right way ?

9th May 2017 8:03pm

stan
Site Moderator

Member Since: 13 Jul 2010
Location: a moderate moderated moderator moderating moderately in moderation
Posts: 35533

... - .- -.

Y. O. L. O.
.

9th May 2017 8:12pm

alfapat

Member Since: 09 Apr 2017
Location: Elgin
Posts: 349

Well well no help that

9th May 2017 9:47pm

Freddie The Fish

Member Since: 13 Apr 2017
Location: Bedfordshire
Posts: 115

The comedy value has been lost now the pictures have been edited..., Stan was on my wavelength

10th May 2017 5:24am

alfapat

Member Since: 09 Apr 2017
Location: Elgin
Posts: 349

Thanks for that

Not the answer I was expecting.

10th May 2017 6:09am

Lukie

Member Since: 27 Sep 2016
Location: Liverpool
Posts: 433

2002 Range Rover Vogue 4.4 V8 Zambezi Silver

this isn't a hard fix

cable A is for video IN

cable B is the trigger to the TV unit this needs to be a negative feed

cable B is attached to a relay looks like red and yellow cable C are attached together, this may be 12v live (feed from reverse camera) but could be 12v neg

guessing cable D is a neutral or 12v pos for the relay system

H and I connect together the other end of H would connect to the camera, the red wire running down the side of H is a power wire, you would connect this to the reverse live

cable E will be 12v reverse live, cable F negative for camera

if you can take better photos of the relay, and the holder and the wiring positions I can confirm further

I'm guessing it's a 5 pin relay with a typically open circut that is then switch into a 12v neg that the tv unit needs to see to switch on the camera input

Click image to enlarge

12th May 2017 8:26pm

alfapat

Member Since: 09 Apr 2017
Location: Elgin
Posts: 349

Ok thank you very much for your reply, I have worked out the description you sent and tomorrow I will confirm this .

12th May 2017 10:07pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum