Good afternoon all. I have read a few threads regarding the replacement of the Front ARB Bushes. Some mention the polybush option and some say you have to replace the bar complete with the already fitted bushes; does anyone know if the part RBX500160 from LR will fit? Local LR dealer (who is very helpful) can not confirm if yes or no. Parts book states they are for the B6 Armoured model only and the ARB for the B6 has a different part number. Any assistance would be great. Thanks.

Just ask Dan at Duckworths for 2 x anti roll bar links, you will get the genuine article and no pfaffing about  .
Experience is the only genuine knowledge, but as time passes, I have forgotten more than I can remember
Volvo V70 P2 2006 2.4 Petrol 170bhp Estate SE
MG Midget Mk1 1962

Previous: L322 Range Rover TDV8 3.6 2008; L322 Range Rover TD6 3.0 2002; P38A Range Rover V8 1999

He asks for the anti roll bar bushes, not the links

I did change mine, scraping the old ones off the bar and replaced with new rubber. I did it that way because I wasn't able to get the anti roll bar out and replace it as a unit, think you need to remove the front sub frame. It did not cure the clunks I had. Never actually found the source before I sold the car. ----------
2014 tdv6 (ex. 2004 td6, 1997 2.5 dse)

Thanks le25dse. Where did you get the new rubber bushes from?

http://www.island-4x4.co.uk/bush-front-rol...-8020.html ----------
2014 tdv6 (ex. 2004 td6, 1997 2.5 dse)

le25dse thanks for the information, I will get them ordered.