L322 TD6, on the dash display there are 2 fuel consumption displays, cons1 and press stalk and cons 2 comes up. they have the same figures. Why have 2?

one can be a running total and the other can be reset for a particular trip... ... - .- -.




Y. O. L. O.
.

I reset one for each fill and the other is ongoing from months back

Simon

The later cars now have 3. Trip A, Trip B and Trip Auto with the last one being only for the current journey.

wondered what trip auto was..... should have rtfm! There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
Fiat 500x 1.4 multiair Lounge 2015
2010 LR D4 Commercial 2.7 TDV6

Yeah, but it's fairly useless. If you stop to fill up it resets to zero. Even my old Skoda managed to work out that a 5 minute stop didn't mean a completely new journey

Thanks guys, I replaced the Head unit with an aftermarket on so no longer have the control functions from the O.E unit to set things. I suppose they can't be reset from the steering wheel controls can they?

they can on the latter models, you press and hold the end of the stalk  There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
Fiat 500x 1.4 multiair Lounge 2015
2010 LR D4 Commercial 2.7 TDV6

Thanks I tried that but it doesn't appear to work on the 2003.

I have herd it rumored that various screen functions can be done with NavCoder http://www.navcoder.com/ And while I still have a copy of NavCoder, I no longer have an L322 to plug it into, and I can't find an obd socket in my RRC

I know that the clock can be set from a pc with NavCoder, and it can program everything on the ibus  Yesterday I couldn't spell Engineer... Today I are one!
Inventor of the 'Guide-o-Matic automatic wheel alignment tool'
Former long term L322 owner, Up/Down graded to a Classic Tractor!

I wonder if iidtool BT can do it?

I'm not too sure, I'd be surprised if it did, as I know it wont switch between NTSC and PAL cameras for the rear, but NavCoder can. FYI NavCoder can only see things on the ibus... most of the systems are on the kbus... but in the earlier BMW cars anything that is linked to the Nav screen is doing via the ibus  Yesterday I couldn't spell Engineer... Today I are one!
Inventor of the 'Guide-o-Matic automatic wheel alignment tool'
Former long term L322 owner, Up/Down graded to a Classic Tractor!

miggit wrote:

I have herd it rumored that various screen functions can be done with NavCoder http://www.navcoder.com/ And while I still have a copy of NavCoder, I no longer have an L322 to plug it into, and I can't find an obd socket in my RRC

I know that the clock can be set from a pc with NavCoder, and it can program everything on the ibus

Try this http://www.ebay.com.au/itm/INPA-Ediabas-K-...SwZQRYgF35  Yesterday I couldn't spell Engineer... Today I are one!
Inventor of the 'Guide-o-Matic automatic wheel alignment tool'
Former long term L322 owner, Up/Down graded to a Classic Tractor!

Thanks Miggit