Lost power steering and can't get into the back of the car! | |
Hi all
Only had the car for 3 weeks, but last week my driver's door external release cable snapped.. this seems to cause a chain of events, or might just be coincidence.
At the exact same time the cable snapped, the rear doors, fuel filler cap, upper boot release and power steering all stopped working, so my only means of entry to the car was via the passenger door.
I installed a new release cable, so I could at least use the driver's door. This didn't fix the other issues.
Then I installed a new driver's door latch, as the old one had a habit of sounding like a machine gun and not locking first time around. This now works a treat, but still can't get in the back seats or the boot.
I have found the emergency fuel filler cap release so I can keep driving, but it's annoying to say the least, not being able to access the rest of the car... Also my arm muscles are like Popeye after a week of no power assisted steering.
I have today received an IID Diagnostics tool - I have used this to clear any errors (there were a few relating to lost comms etc.. and a couple of "Unknown" errors. This didn't help. I also enabled / disabled transport mode, as other forum posts mentioned this may be the issue. No help.
I have re-synced the keys, this didn't help. The keys open the door fine, just not the rest of the car. The internal button for the locking only opens / closes the front doors.
I have checked and double checked all wiring behind the driver's door card, although the problem existed before I took the card off.
I have checked all connections to the BCM, it is nice and clean, no skid marks and connectors are secure.
I have checked all fuses in the glovebox and boot with a multimeter.
Also done a battery reset.
Anyone have any ideas??? 2007 4.2 Supercharged
|