I have just had a SeceuroGlide roller shutter garage door fitted and have been trying to programme the rear view mirror to operate it without success. I have established it has the roll-over code type operation which, according to the RR manual needs two stages of programming.

The first stage seems to be working fine, holding the garage remote near the mirror and pressing the remote button and one of the mirror buttons at the same time until the red LED on the mirror blinks rapidly.

The second stage to programme the roll-over code part is where I am having problems and the instructions which come with the door conflict with the ones in the RR user manual.

I realise that this is a long shot but if anyone has managed to do this I would be very grateful to learn how!! 2011 4.4 TDV8 Vogue SE
1993 Discovery 1 3.5 V8i

I have tried this with my Homelink but came to the realisation that the door codes have moved on so far from what the Homelink can do that it will never work ,
Have you thought about fitting an older door?
Sorry  2008 MY Supercharged
Rimini Red / Jet
four zone climate
remote park heater
and no ugly kid windows.
magnus satis quod turpis satis