Home > Technical (L322) > Bonnet release broken!!!! |
|
|
steveball Member Since: 09 Jun 2011 Location: Corsham, UK Posts: 208 |
If you remove the trim which surrounds the bonnet release, you will find that there is a cable connected to the lever. At least, the cable should be connected to the lever. There is a small metal nipple at the end of the inner cable, which will have snapped off. That's why there is no tension.
|
||
10th Jan 2017 8:31pm |
|
rangeseb Member Since: 06 Nov 2015 Location: Baldock North Hertfordshire Posts: 185 |
Got it open!!!! Thank you!!!!
|
||||
10th Jan 2017 8:44pm |
|
Realist Member Since: 13 Feb 2016 Location: Wales Posts: 436 |
I had the very same issue a few weeks back and its the same as above, simple job to fix. Range Rover quotes.....
|
||
11th Jan 2017 3:37pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis