The spoilers have different part numbers even for 02-09 versions suitable for a reversing camera. I want to experiment cutting holes in the top and bottom trying to direct air down the rear window but wont be cutting mine. However a cheap early version is of no use if it wont fit.

Is the difference due to different stop-light dimensions?
Will an early one mount on a later vehicle, even if the later stop-light isn't a direct fit?

Thanks

Think I have the old stop light from my 2002, I'll have a look later.

Thanks.

Sorry for huge delay, they look identical

Thanks Mr Tee.

The cheap enough earlier spoiler is not nearby so I still have to consider the cost of getting it, either the freight or the time and fuel. I'm not very hopeful that I can cause a sufficient reduction in dust accumulation under the top of the upper tailgate and along the hip at the bottom edge of the glass but would like to try.

There are three differences to the spoiler.
The early ones, 2002-2005/06, no camera fitted (as far as I know).
2005/06-2009 fitted with camera.
2009 onwards, also fitted with camera, these are a different camera to the 2005/06-2009 and are mounted in a different place around 30-40mm (1-1/8" to 1-9/16") further to the right of the hi level brake light unit.
Mounting the spoiler to the door frame as far as I can tell uses the same slide on mounts and three 6mm bolts to secure it.
Unfortunately the 2009 onwards spoiler went to the tip a couple of weeks ago, the outer skin was badly damaged.

Steve. 1968 Series IIA Pastel Green, nearly there project