As above, the cooling works, blower switches on, turning the switch to cool, but no reaction when turned on to warm my buns? Anyone of this well informed crowd knows what to do?
Oh and yes I cleaned the filter. Thanks in advance.

similar problem maybe here,

http://www.fullfatrr.com/forum/topic10106.html ... - .- -.




Y. O. L. O.
.

hello

have the same problem on my RR
strip the back rest seat, the pipe was broken, the ecu shut down the fan but leave the light on. RR L322 4.4 TDV8 Vogue
RR L322 3.6TDV8 Vogue
Disco TD5 HSE
RR P38 4.6 HSE v8 GPL
Disco 3.9 V8 GPL
Disco 3.5 V8 GPL
RR 300TDI
RR 2.4 VM TDI
Land Commando

thanks Stan, had not searched well enough..
thanks Phil
The only thing that is different is the blower/fan working for the cooling. So it can't be the fan.
We'll have a look in the chair...

on mine the fan run normally to cool the seat, but not heating as ther's a security
if the pipe is broken there's no air running through the heat resistence, too hot so the ecu shut down the fan RR L322 4.4 TDV8 Vogue
RR L322 3.6TDV8 Vogue
Disco TD5 HSE
RR P38 4.6 HSE v8 GPL
Disco 3.9 V8 GPL
Disco 3.5 V8 GPL
RR 300TDI
RR 2.4 VM TDI
Land Commando

graci mille

On heating it needs a temperature reading for the ECU and as the pipe is probably broken it over reads and shuts down , on cooling the circuit goes closed loop and carries on happily for now but will fail in time . Seat out I'm afraid I'd almost recommend just ordering the Peltier cell now I'm so certain it's the broken pipe  2008 MY Supercharged
Rimini Red / Jet
four zone climate
remote park heater
and no ugly kid windows.
magnus satis quod turpis satis