Hi guys,

I've fixed my folding mirrors by replacing the microswitches, they now fold fine by pressing the little button next to the wing mirror L/R selector.

What i have noticed though is that they don't fold when i press the large access height button. Is there a reason for this? I was expecting the access height button to allow me to lower the vehicle and fold the mirrors to fit it into the garage?

Thanks in advance

Don't think that folding mirrors when pushing the Access button is a standard function, but you may find it on the secret menu or using an IID tool possibly?

Last edited by Dolphinboy on 30th Nov 2016 12:13pm. Edited 1 time in total

But the button looks like it has an arrow on it that adjusts the mirrors and height?


Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated

No, the access button is only to lower the height of the Range Rover. There is no secret menu or option in the ccf to fold the mirrors in, your only option is to press the mirror folding in button.

Regards ______________________________
Simon
______________________________

Range Rover Classic 3.5 efi - Gone
Range Rover Classic 3.9 efi - Gone
Range Rover Classic 4.2 LSE - Sadly gone
Land Rover 110 3.5 - Gone
Range Rover P38a 4.0 SE - Pleased it's gone
Range Rover P38a 2.5 DHSE - Just sold
Range Rover L322 4.4 v8 Petrol - Current

mine folds when pressing access button

I'll check mine, hopefully there's nothing wrong.............. ______________________________
Simon
______________________________

Range Rover Classic 3.5 efi - Gone
Range Rover Classic 3.9 efi - Gone
Range Rover Classic 4.2 LSE - Sadly gone
Land Rover 110 3.5 - Gone
Range Rover P38a 4.0 SE - Pleased it's gone
Range Rover P38a 2.5 DHSE - Just sold
Range Rover L322 4.4 v8 Petrol - Current

What year is yours? Have you got a photo of the button? (My cars at home, and I'm not)

My button clearly shows an arrow indicating height and a second arrow indicating mirrors.

mines same as top picture

Mine is too. I've just checked the handbook and it doesn't say anything about the mirrors folding in when you press the access height button.

I'll have to have a go later when I go out. ______________________________
Simon
______________________________

Range Rover Classic 3.5 efi - Gone
Range Rover Classic 3.9 efi - Gone
Range Rover Classic 4.2 LSE - Sadly gone
Land Rover 110 3.5 - Gone
Range Rover P38a 4.0 SE - Pleased it's gone
Range Rover P38a 2.5 DHSE - Just sold
Range Rover L322 4.4 v8 Petrol - Current

According to the diagram in the owner handbook the image shows a bent line with an arrow at either end indicating getting in and out of the car easier and the other arrow at the other side of the image indicates the direction of the suspension travel when you press the button, and it's pointing down.. ______________________________
Simon
______________________________

Range Rover Classic 3.5 efi - Gone
Range Rover Classic 3.9 efi - Gone
Range Rover Classic 4.2 LSE - Sadly gone
Land Rover 110 3.5 - Gone
Range Rover P38a 4.0 SE - Pleased it's gone
Range Rover P38a 2.5 DHSE - Just sold
Range Rover L322 4.4 v8 Petrol - Current

Isn't that indicating the dip mirror function when you have the mirror adjust button onto the driver's side and the passenger mirror dips? "YYS" G4 FFRR
G4 2006 Thailand Support Vehicle - Fleet Number 81

I don't think so.... ______________________________
Simon
______________________________

Range Rover Classic 3.5 efi - Gone
Range Rover Classic 3.9 efi - Gone
Range Rover Classic 4.2 LSE - Sadly gone
Land Rover 110 3.5 - Gone
Range Rover P38a 4.0 SE - Pleased it's gone
Range Rover P38a 2.5 DHSE - Just sold
Range Rover L322 4.4 v8 Petrol - Current

mirror dips when you reverse automatically

But only when you have the mirror adjust button on one side; otherwise it doesn't "YYS" G4 FFRR
G4 2006 Thailand Support Vehicle - Fleet Number 81

...and on later cars the mirror dipping function is programmable through the screen. Only Range Rovers since 1988