I noticed that the wear sensor wire for the rear brake on my 2005 Vogue has been rubbing on the inside of the wheel rim and had almost worn through. I've bought another to fit, but was just wondering why it would have done this in the first place ? Its running 18inch standard RR rims, and the rubber fitting was in place over the bleed nipple on the rear caliper. Has anyone got a picture (or could point me to one) showing how it should be routed at the caliper end ?

This any good......



Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated  Pete
I now have permission from the boss to use Y.O.L.O. Enjoy life
__________________________________________________
2014 L405 Autobiography SDV8 4.4 Loire Blue Ebony interior
2011 L322 Vogue SE 4.4 TDV8 Baltic Blue. Sold
2012 L322 Autobiography 5.0 Supercharged Ipanema Sand Sold
2002 L322 Vogue 4.4 V8 Epson Green (Fatty Offroader) Sold
-Click for Project Fatty off roader-

Perfect ! Thanks, new lead fitted and routed properly

 Pete
I now have permission from the boss to use Y.O.L.O. Enjoy life
__________________________________________________
2014 L405 Autobiography SDV8 4.4 Loire Blue Ebony interior
2011 L322 Vogue SE 4.4 TDV8 Baltic Blue. Sold
2012 L322 Autobiography 5.0 Supercharged Ipanema Sand Sold
2002 L322 Vogue 4.4 V8 Epson Green (Fatty Offroader) Sold
-Click for Project Fatty off roader-