Advertise on fullfatrr.com »

Home > Technical (L322) > L322 Inlet Manifold
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Paul1234002



Member Since: 06 Oct 2015
Location: Manchester
Posts: 32

England 2006 Range Rover Vogue 4.4 V8 Barolo Black
L322 Inlet Manifold

I had a recent issue with Black smoke and have changed the EGR and Crankcase Breather(Upgrade). Thank you to all who gave advise.

At first, all was good but i have been out in the L322 Td6 today and i found that although it seem to drive ok
I feel it is lacking in power.

So when i got home had a look under the bonnet to find very slight oil spray on the inner engine bay but also found oil coming from the seam of the inlet manifold. This has now been removed and given a clean and at two of the corners look like they are coming apart.

Has anybody had this issue and if so did you buy a new or second hand one or did you fix it?

Any help would gratefully received.

Post #401412 21st Aug 2016 7:14am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
fullfatrr.com RSS Feed - All Forums


Switch to Mobile site