This is my rear passenger door trim at the bottom, and as anyone married or with a long term partner would know it's never their fault!

Does anyone know if it's possible to get this without the whole door trim?

Yeah, about £60 IIRC, ask Dan for a price... they are badly made and don't fit very well at the best of times....  Pete
__________________________________________________
2014 L405 Autobiography SDV8 4.4 Loire Blue Ebony interior
2012 L322 Autobiography 5.0 Supercharged Ipanema Sand Sold
2011 L322 Vogue SE 4.4 TDV8 Baltic Blue. Sold
2002 L322 Vogue 4.4 V8 Epson Green (Fatty Offroader) Sold
-Click for Project Fatty off roader-

yep inexpensive, indeed, but order the hard plastic clip part too (the thin part on your (upside down) picture) it is only a few pounds and you'll need to fit it all back together. l=Oo\________/oO=l l:OolΞΞΞΞΞΞΞloO:l

Current
RANGE ROVER Vogue 4.4L SDV8 - 2013 - Indus Silver, on Almond.
RANGE ROVER Vogue 4.4L V8 - 2002 - ex-2003 G4 Challenge Event Vehicle, Stage 3: Australia
RANGE ROVER HSE 4.4L V8 - 2004 - one-of-one Overfinch
RANGE ROVER P38a 4.0L V8 - 1999 - ex-2000 TReK Event Vehicle: South Africa

Previous:
RANGE ROVER Vogue 4.4L TDV8 - 2012 - RANGE ROVER 3.6L TDV8 x3 - RANGE ROVER Td6 x1 - RANGE ROVER Classic 3.5L V8 x1

Thanks for your replies lads.

To be honest it's only the plastic part mentioned that's broken I believe, the clips seem to be snapped most of them and a previous owner has tried to glue it together.

Will see what I can get hold of, bit of a relief though  

Here's the diagram, the seal itself is about £60, not sure which bit is the plastic strip with the weird clips though?!

Click image to enlarge

I tried - not available separately. I used some trim tape and some trim buttons, it fits fine and you'd never know.

If you take it off and refit using the plastic part give it a dam good clean with warm soapy water and then gummi pflege it once fitted to keep it supple and seal well FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

Hi, you need parts:

LR031395 for RHS
LR031396 for LHS,

both available on Topix NOW, about 25 Sterling VAT inc