Home > Wheels & Tyres > Wheel fitment |
|
|
northernmonkeyjones Member Since: 24 Mar 2012 Location: derby Posts: 8503 |
The stud pattern and centre should be the same, my vogue wheels are on my D4, it does depend on what size you are looking at to some degree, looking at your car details it doesn't look like you would have brembos so there should be less issues. There is nothing that can't be fixed with a hammer😜😜
|
||
20th Apr 2016 8:48pm |
|
Tang37 Member Since: 25 Jan 2016 Location: Manchester Posts: 20 |
Hello thanks for your reply. I do have brembos fitted to my rr. The wheels I am looking at are 22". |
||
20th Apr 2016 8:55pm |
|
northernmonkeyjones Member Since: 24 Mar 2012 Location: derby Posts: 8503 |
Would be careful then as there are no genuine 22" disco wheels out there. 20" was the biggest LR put on the D4 and L322.
|
||
20th Apr 2016 9:06pm |
|
kezbo1981 Member Since: 20 Jan 2015 Location: Evesham, Worc Posts: 334 |
Agree with above, be careful of the quality and load rating of the after market wheels. You only have to see how many sets on ebay are cracked and previously welded. That said there are some ok ones out there - I've just taken a set of 22 stormers off mine (didn't like the look), I think they were made by Hawke and have a load rating stamped on the back in excess of the weight of the RR and after a couple of years show no signs of issue. |
||
20th Apr 2016 10:25pm |
|
Cam-Tech-Craig Member Since: 03 Aug 2011 Location: Gloucestershire Posts: 16280 |
^ But the issue is, if they are fake/copies/counterfeit (however you wish to refer to them) how can any information stamped on them be relied upon sir
|
||
21st Apr 2016 7:52am |
|
kezbo1981 Member Since: 20 Jan 2015 Location: Evesham, Worc Posts: 334 |
That's a fair point. The ones I just took off mine dont claim to be overfinch, RR etc so I would hope the load marker has some science behind it, but who knows! All I know is that the previous owner ran them for a couple of years without problem and I took them off to be replaced by standard supercharged wheels as it looks better in my opinion. |
||
21st Apr 2016 11:05am |
|
Tang37 Member Since: 25 Jan 2016 Location: Manchester Posts: 20 |
Thanks very much for your advice I will leave them alone and look for some genuine RR alloys. |
||
21st Apr 2016 9:44pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis