Hi guys .. just a heads up from anybody who has fitted powerfuls 2010 style rear leds.. I've fitted a set on my car using resistors and ballasts and a set to a friends using the interface box you can buy.. both sets of lights seem to have half the lower part of the fog illuminated? When you press the fog it brightens up hugely.. just wondering if this is normal and they maybe quite aren't the same as the proper landrover ones..no errors or hyper flashing indicators either so wired up correctly..

Click image to enlarge

And it made your FF fall over....  Pete

__________________________________________________
2014 L405 Autobiography SDV8 4.4 Loire Blue Ebony interior
2011 L322 Vogue SE 4.4 TDV8 Baltic Blue. Parchment over Navy Interior. Sold
2012 L322 Autobiography 5.0 Supercharged Ipanema Sand, Jet Interior. Sold
2002 L322 Vogue 4.4 V8 Epson Green, Ivory over Aspen Interior (Fatty Offroader) Sold
-Click for Project Fatty off roader-

Hahahaha I cannot for the life of me get them to post upright! Stan usually saves the day and fixes it..

saved the day again..........

There's a configuration setting that you need to change so that the half fogs are switched off. I had this issue but I cannot remember the exact coding but I believe it was the 'half fog' light or similar.

I have a Faultmate Extreme which can re-code the CCF and the GAP IID tool will also do the same job.

regards

John

Brilliant! I have an iid tool there.. @ Stan thanks (again)!

Oh, you also might want to switch the 'cold monitoring' off re the lights otherwise you may well have warning bongs (check light bulbs) and / or lights flickering on start up.

That's a great help thankyou.. I have a brand new iid tool now so shall get a chance tomorrow evening to do this..

Any update on this? I have a 2003 Vogue that I'm going to do the rear lights on. I don't mind some DiY, but would like to know these can be fitted without problems?

Looks great!