I'm going on a bit of a trek tomorrow to pick up a new bike so I decided to have a go at sorting my autochanger which scrolls up and down the magazine but won't load discs...

Followed the guide from one of the other sites, found some extra hidden fastners but eventually got it out and stripped it on the bench. Couldn't find anything wrong so I gingerly connected it up on the seat, popped the mag in and delighted as it went through the sequence and commenced playing music! Voila!!

Put the whole caboodle back together, didn't have any bits left over..... Switched on the ignition and the sodding thing has gone back to the way it was before.

However, the autochanger is in a plastic tray which slots into the glove box with two screws holding it in place, one on each side. I've left the inner one out so I only have to unclip the trim beside the door to get the git of a thing back out. Can't be bothered doing it tonight so I'll just listen to the radio tomorrow...

Ho hum.