Hi, I have recently been getting the trans fail safe message come up within the first few miles of driving the car. The car goes into limp mode and then have to pull over and switch off.

However I have now found if I push the stick over to the left and change up the gears myself then the error does t come on and the car drives fine. I have driven it like this over the last week and the message hasn't appeared.

Does anyone know what the problem could be and what I should look at?

Thanks.

Could be the selector switch on the side of the box I think there is something in the wiki about it or do a search which should bring loads up about it

Hi, how easy is this switch to get at? are they serviceable or just replace? thanks

Access is easy, getting them off a bit of a faf... pretty sure they are sealed units, they are rather expensive though, many hundreds... eBay is probably a good idea... you need to get it confirmed it is faulty first, needs some diagnostics... Pete
I now have permission from the boss to use Y.O.L.O. Enjoy life
__________________________________________________
2014 L405 Autobiography SDV8 4.4 Loire Blue Ebony interior
2011 L322 Vogue SE 4.4 TDV8 Baltic Blue. Sold
2012 L322 Autobiography 5.0 Supercharged Ipanema Sand Sold
2002 L322 Vogue 4.4 V8 Epson Green (Fatty Offroader) Sold
-Click for Project Fatty off roader-

Hi guys. Just to point out that if JPS has a TD6 then unfortunately the inhibitor switch is inside the sump rather than bolted to the outside of the casing

Click image to enlarge

Click image to enlarge

Click image to enlarge

Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated

Can always count on RRPhil to put us right

If that picture is of a good auto box could you send it my way as my one is