I'd be grateful for any guidance on this.

I'm trying to replace one of the fog lights as the lens is broken. The 'Powerfuluk' video suggests that you can simply unscrew one fixing from the wheel arch trim and then pull the cover back in order to reach through and unclip the 4 fog light surround tabs.

http://www.powerfuluk.com/products/range-r...sert).html

However, the lip of the wheel arch trim is firmly held in place by the bumper trim etc which all slots together. I can't see how I can pull back the wheel arch trim just by undoing 1 screw.

Could any one shed any light please?

Hold the fog bezel in one hand and pull gently... Put a small electrical type screwdriver from the front down the side of each tag and wiggle! That tag will dis-engage then do the next & so on...

Once removed simply unscrew the light from the front and replace...

A Ford Transit, Focus, Mondeo fog lamp is the same part and 1/4 the price if you have yet to buy one

Perfect - thank you so much. Job done