Hopfully someose can assist, I need to replace the rear parking sensor as mine has a strange line accross the screen when operating. (The actual screen is ok as the nav and TV still works perfectly)
I did order a new camera (being a little but tight from ebay) but it was a genuine Land Rover part that shoud have fitted my model year but doesn't.
The camera I have is part number LR031812 and has 4 pins showing, the one I need (picture attached) looks like a single pin with 2 smaller pins above. Any ideas???? Cheers.

Click image to enlarge

Any reason this has been moved? I would think this definitely falls under maintenance. It's a replacement of an existing part.

There are two camera versions available for your rear end sir... Does yours have vision assist? (mirror mounted camera’s & alike) if it does NOT then you have a fixed type rear camera! If you have V.A. then you have a moving rear camera sir...

Would appear you now have one of each sir

a "moving" rear camera? Sure?
moving in the sense that the lens can move?

regards
heppsen 2017 MB V-Class
2016 Q7 (gone)
2012 FFRR TDV8
2012 Smart Pulse Turbo
1986 MB W126
1965 LR Series 2A
1961 LR Series 2

i think its the guide lines that move.. ... - .- -.




Y. O. L. O.
.

I believe you can pan in and out (as well as the lines moving with your steering inputs) too can’t you? Remember JC on his first test panning in on a lovely young lady in the car behind him stuck in London traffic...

Thanks for the replies. I'll give Dan at Duckworth a shout tomorrow and find out the bad news. Looking at the description it did say fixed but i suppose that's the gamble of ebay! There may be a camera for sale very soon..

So, does yours have VA or not sir?

No, no vision assist on mine.

In that case, if you find a used one? Make sure it is not defective! Big issues with the pictures reversing on the early cameras!

I'll just get a new one now, don't really have the time to keep swapping out!