fullfatrr.com - View topic - Resler Interface

Advertise on fullfatrr.com »

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > In Car Electronics (L322) > Resler Interface

Page 1 of 1

Print this entire topic ·

thatgirl101

Member Since: 28 Feb 2014
Location: London
Posts: 45

2003 Range Rover Vogue 4.4 V8 Giverny Green

Resler Interface

Hi all,

I'm trying to install a Resler interface into my 2003 V8 Vogue. Am I right in thinking that all I need to do is find the right cables in a loom (i.e. Ibus, ground, live), pull out the relevant pins, push in the corresponding cable from the interface and push the pin back in?

I have an accessible wiring loom connected to my bluetooth module - I was thinking of just wiring it in to that - would that work?

Thanks v much.

26th Apr 2015 4:32pm

mjdronfield

Member Since: 04 Nov 2011
Location: Derbyshire
Posts: 7799

2011 Range Rover Vogue SE TDV8 Buckingham Blue

Not done it myself, I use the OBD 2 connection under the dash for Navcoder, that can also use a resler interface.

I believe you can wire it as you describe.

It just piggy backs on the loom.....

2011 Range Rover Vogue SE 4.4 TDV8

Previous cars :
2003 Range Rover Vogue TD6
1999 Discovery Td5 ES
1995 BMW M5 3.8 6 speed
1992 Range Rover 3.9 Efi Vogue
1992 BMW M5 3.8
1988 BMW 735i SE
1989 Ford Sierra XR4x4 2.9i
1981 Ford Fiesta Supersport

26th Apr 2015 4:37pm

miggit

Member Since: 12 Jul 2014
Location: Milton Keynes
Posts: 3657

The I-bus is commoned up behind the glovebox just above the fuses, so in theory you should be able to piggy back on to the I-bus at any module on the system. But as Mark says I also use an OBD II lead to connect the Navcoder, after a wise man put me on to the lead!

http://www.ebay.co.uk/itm/BMW-Diagnostics-...735659568? Yesterday I couldn't spell Engineer... Today I are one!
Inventor of the 'Guide-o-Matic automatic wheel alignment tool'
Former long term L322 owner, Up/Down graded to a Classic Tractor!

26th Apr 2015 7:14pm

Joe90

Member Since: 29 Apr 2010
Location: Hampshire
Posts: 6408

The old fashioned way:

Click image to enlarge

And see

http://www.fullfatrr.com/forum/topic8786.html .
Experience is the only genuine knowledge, but as time passes, I have forgotten more than I can remember

Volvo V70 P2 2006 2.4 Petrol 170bhp Estate SE
MG Midget Mk1 1962

Previous: L322 Range Rover TDV8 3.6 2008; L322 Range Rover TD6 3.0 2002; P38A Range Rover V8 1999

26th Apr 2015 9:04pm

thatgirl101

Member Since: 28 Feb 2014
Location: London
Posts: 45

I bought one of those OBII cables but never managed to get it to work with NavCoder.

Will try wiring in the Resler interface this week, thanks for the replies.

27th Apr 2015 8:30am

miggit

Member Since: 12 Jul 2014
Location: Milton Keynes
Posts: 3657

Did you load the drivers that came with the lead? and then set it to com 1 ? Mine was less than cooperative, but in the end it gave in and installed its' self. Only the car speaks serial (RS232) the the computer has progressed to usb so with out the drivers (translator) they aint gonna talk Yesterday I couldn't spell Engineer... Today I are one!
Inventor of the 'Guide-o-Matic automatic wheel alignment tool'
Former long term L322 owner, Up/Down graded to a Classic Tractor!

27th Apr 2015 9:37pm

thatgirl101

Member Since: 28 Feb 2014
Location: London
Posts: 45

I'll try the OBII cable again tonight - unfortunately, though, I've lost the driver CD. Does anyone know where I can download them from?

28th Apr 2015 7:48am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum