![]() | Home > Technical (L322) > Sitting square |
![]() ![]() |
|
|
johnboyairey Member Since: 11 Jan 2013 Location: surrey Posts: 2035 ![]() ![]() ![]() |
You may have a broken height sensor, each wheel has one. So four on the car...or even just a malfunctioning one. You can check if there is any damage by inspecting them with a wheel off, one at a time. They have a thin arm coming from them and these can break of come off or the sensor could be corroded inside. -it thinks it's set right, but it looks wrong. Maybe do some searches on here for height sensors. |
||
![]() |
|
ajac8 Member Since: 04 Oct 2011 Location: Shakespeares County Posts: 1661 ![]() ![]() ![]() |
I'm not sure but is it not possible to reset them by turning the steering all the way right then all the way left lock to lock?
|
||
![]() |
|
Joe90 Member Since: 29 Apr 2010 Location: Hampshire Posts: 6416 ![]() ![]() |
Suspension may need calibration if always a bit low on one side. Diagnostic tool, tape measure and some level ground.
|
||
![]() |
|
Cam-Tech-Craig Member Since: 03 Aug 2011 Location: Gloucestershire Posts: 16315 ![]() ![]() ![]() |
The crazy world of Range Rover |
||
![]() |
|
chefkenmore Member Since: 11 Jan 2015 Location: Fearnan perthshire Posts: 750 ![]() ![]() ![]() |
Thanks for the answers, shall check next week when it returns after full wheel refurb, and front bumper and inner sill respray!!
|
||
![]() |
|
![]() ![]() |
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
