fullfatrr.com - View topic - Replacement reversing camera

Advertise on fullfatrr.com »

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > In Car Electronics (L322) > Replacement reversing camera - help

Page 1 of 1

Print this entire topic ·

Buz1500

Member Since: 05 Sep 2011
Location: Cumbria
Posts: 369

2019 Range Rover Autobiography SDV8 Carpathian Grey

Replacement reversing camera - help

I'm in the process of replacing my rear view camera on my 2006 tdv8 but I can't get a picture on the new camera. The camera is the same as another forum member purchased which was successfully installed. The problem may be because I've connected the wires incorrectly. Can anyone advise as to the correct connections please

I've tried to find the original post without success.

10th Apr 2015 9:48am

stan
Site Moderator

Member Since: 13 Jul 2010
Location: a moderate moderated moderator moderating moderately in moderation
Posts: 35272

red and black are power, yellow is normally the inner wire for the video feed..cant make out if there's an outer braiding of some kind.. ... - .- -.

Y. O. L. O.
.

10th Apr 2015 10:24am

Buz1500

Member Since: 05 Sep 2011
Location: Cumbria
Posts: 369

Hi Stan
There's no braiding on the yellow, perhaps I need connect one of the unused wires to the braiding on factory cable?

Buz

10th Apr 2015 11:24am

stan
Site Moderator

Member Since: 13 Jul 2010
Location: a moderate moderated moderator moderating moderately in moderation
Posts: 35272

thats a plan...

any instructions with the camera? ... - .- -.

Y. O. L. O.
.

10th Apr 2015 1:57pm

Alistair

Member Since: 11 Feb 2011
Location: Peterborough / Bordeaux / Andorra
Posts: 7925

2013 Range Rover Vogue SE SDV8 Santorini Black

I can't understand why theres a 5th wire.

I agree that red is +12v, black is -ve, yellow and white are most likely inner & outer camera cable

Is there a microphone, or LED's in the unit ?

10th Apr 2015 2:04pm

Buz1500

Member Since: 05 Sep 2011
Location: Cumbria
Posts: 369

No instructions I'm afraid, going to try to connect the White wire as the outer video cable. Let you know how it goes later

10th Apr 2015 2:23pm

VMPP

Member Since: 12 Jul 2009
Location: Lisboa
Posts: 410

2007 Range Rover Vogue TDV8 Buckingham Blue

Seems like you have one of these:

http://www.ebay.co.uk/itm/231390415722?_tr...EBIDX%3AIT

I've fitted one of those to my car, and i'm pretty happy with the result

10th Apr 2015 2:41pm

Buz1500

Member Since: 05 Sep 2011
Location: Cumbria
Posts: 369

Hi VVMP
Could I ask how you connected it to the car wiring

10th Apr 2015 3:56pm

Ethanicus

Member Since: 23 Feb 2015
Location: Surrey
Posts: 34

2010 Range Rover Vogue SE TDV8 Stornoway Grey

My understanding of these when I fitted one to a friend’s pioneer av screen on a 350z is as follows:

As pre stans comments:

RED: IGN Hot +
BLACK: NEG –
YELLOW: Video Out / Video IN Feed to Head Unit (If connecting to a RCA jack, you may need to link the shield to Camera Black (earth
GREEN: Keep Disconnected\capped unless you want a solid white line on the screen (parking aid/guide).
WHITE: Depending on the camera it changes then origination of the lens (front or rear facing). If using for rear camera you may need to loop this to earth (black cable). or Positive (red)

If you can test on a 12v bench power supply, it may avoid any damage in testing. 2010 - Range Rover VSE 3.6 TDV8
2014 - Defender 90 XS
2014 - Suzuki Swift Sport
2017 - GBS Zero
2006 - BMW Z4M Coupe (gone)
2004 - Discovery Landmark TD5 Auto (gone)
2008 - Defender 90 SX (gone)
2011 - Touareg Altitude (gone)

10th Apr 2015 5:07pm

VMPP

Member Since: 12 Jul 2009
Location: Lisboa
Posts: 410

Buz1500 wrote:
Hi VVMP
Could I ask how you connected it to the car wiring

Chopped off the cables, stripped them, and connected all together.

You have, under the tailgate upper trim, 2 connectors. One for the video and one for the power. The power is a white plug with the red and black wires and the video is a very small RCA type connector.

You can chop them before (leave enough cable) the connectors and then and hardwire them together.
That's what I did except for the video part. By my mistake, I chopped the video after the connector and ended up having to connect it without using the original connector. So for the power I'm using the original connector and for the video I had to hardwire them together.

13th Apr 2015 10:52am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum