Well it looks like a new screen needed as last night the heated screen wouldn't clear the mist inside and frost too

Before getting autoglass out im after some info, where do the wires run for the heated screen , which 'a' pillar or are they in both. Want to check continuity to make sure the screen IS foobared and how the heck do you get the airbag badge off the a pillar trim?

 If it dont work.......burn it!

If the IId tool cant fix it.......burn the FF.

If the FF cant be fixed......buy a Land Cruiser!

If the LC cant be fixed..............................................BUY a horse !!

Airbag Badge - in RAVE it just appears to be clipped in, may require "effort"

Caution: Disconnect battery and let SRS system die first.

Seems also there are connectors under both A pillar trims (inside) but I seem to remember there were connections to the screen lurking below the scuttle/air intake at the lower front of the screen outside. .
Experience is the only genuine knowledge, but as time passes, I have forgotten more than I can remember
Volvo V70 P2 2006 2.4 Petrol 170bhp Estate SE
MG Midget Mk1 1962

Previous: L322 Range Rover TDV8 3.6 2008; L322 Range Rover TD6 3.0 2002; P38A Range Rover V8 1999

The airbag badge does just clip off but its quite hard to do, I was worried I waas going to break mine when I did it but eventually it popped off.

Thanks Tim and Fish

Will attack it in a little while, much appreciated  If it dont work.......burn it!

If the IId tool cant fix it.......burn the FF.

If the FF cant be fixed......buy a Land Cruiser!

If the LC cant be fixed..............................................BUY a horse !!