Advertise on fullfatrr.com »

Home > Maintenance & Mods (L322) > Front of car is off - advice needed
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Zain



Member Since: 17 Apr 2014
Location: London
Posts: 98

United Kingdom 2003 Range Rover Vogue 4.4 V8 Java Black
Front of car is off - advice needed

Hi....as per my other post, im having the entire cooling system replaced after having a radiator leak. Have also decided to replace the 3 main oil breather hoses + PCV valve itself. Upon closer inspection, the rear cam cover gasket is leaking quite a bit so have decided to replace both sets of cam cover/rocker gaskets too. Now that the top head is off and the front of the car off (mechanic said he needed the access space to make his life easier - its a fixed price job so no worries on the extra hours).....what else would anyone suggest i should replace/upgrade as a preventative measure?

So far im having done:
Radiator + all hoses
Thermostat
Waterpump
Aux drive belt
AC belt
Viscouse coupling
Coolant/Antifreeze
Cam/rocker cover gaskets
Bolt grommets for cam cover
Starter motor
Oil breather hoses
PCV valve
(Cyclonic separator has been thoroughly cleaned out and re used)
Water hose adaptor on top of manifold
Oil+filter change
Air filter
Pollen filter
Fuel Filter
FSR
Battery - maybe?

Is there anything else advisable to change or thoroughly clean up? Thinking spark plugs but which ones for this M62 (not sure if its the TU variant or not......and not even sure if this matters or not???). Is there a timing chain seal/gasket that i should be changing too?

Any advice/recommendations on any of the above or suggestions for future preventative maintenance would be greatly appreciated in this season of goodwill.

Seasons Greetings to all!

Post #300777 24th Dec 2014 4:09pm
View user's profile Send private message View poster's gallery Reply with quote
Haylands



Member Since: 04 Mar 2014
Location: East Yorkshire
Posts: 8285

England 2014 Range Rover Autobiography SDV8 Loire Blue

Drivebelt and aircon belt tensioners are pretty cheap and the bearings do wear, as well as the little shock absorber that tensions the belt.

There is also an upgrade to get rid of the plastic waterpump pulley with a BMW alloy one....

I'd also do the autobox oil cooler and thermostatic mounting plate, again, the plate is plastic and yours will be brittle...

Good luck, should be sorted for sometime with that lot done.... Pete
__________________________________________________
2014 L405 Autobiography SDV8 4.4 Loire Blue Ebony interior
2011 L322 Vogue SE 4.4 TDV8 Baltic Blue. Parchment over Navy Interior. Sold
2012 L322 Autobiography 5.0 Supercharged Ipanema Sand, Jet Interior. Sold
2002 L322 Vogue 4.4 V8 Epson Green, Ivory over Aspen Interior (Fatty Offroader) Sold
-Click for Project Fatty off roader-

Post #300781 24th Dec 2014 4:37pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
fullfatrr.com RSS Feed - All Forums


Switch to Mobile site