Home > Technical (L322) > 5.0 S/C restricted performance, misfire on four cylinders. |
|
|
northernmonkeyjones Member Since: 24 Mar 2012 Location: derby Posts: 8523 |
Something common to one bank by the look of it. Could be coil pack related? There is nothing that can't be fixed with a hammer😜😜
|
||
13th Jun 2018 5:04pm |
|
Nickiwi Member Since: 03 Aug 2017 Location: Southampton Posts: 10 |
That was my first thought (and also the neighbour, who's pretty useful with a spanner).
|
||
13th Jun 2018 5:10pm |
|
dingg1 Member Since: 29 Jun 2013 Location: PORTUGAL Posts: 1344 |
cam position sensor? |
||
13th Jun 2018 5:16pm |
|
Nickiwi Member Since: 03 Aug 2017 Location: Southampton Posts: 10 |
Thanks for your help on this guys. Turned out to be an injector that was stuck wide open, dumping fuel into the cylinder. After it had been sorted, I checked the trip and it had used about 75 litres to go 57 miles!! After giving me heart palpitations for a week or so, it's going in to have the chain guide upgrade done. Don't fancy detonating that engine! |
||
20th Jul 2018 9:25am |
|
paulbrown22 Member Since: 23 Dec 2017 Location: London/Poole Posts: 352 |
Good to know about the injector, something I shall remember for the future.
|
||
20th Jul 2018 4:56pm |
|
Nickiwi Member Since: 03 Aug 2017 Location: Southampton Posts: 10 |
My indie is West 4x4 in Bishops Waltham, Hampshire. He's been great throughout ownership of previous Discos and the FFRR.
|
||
21st Jul 2018 1:18pm |
|
paulbrown22 Member Since: 23 Dec 2017 Location: London/Poole Posts: 352 |
Super, thank you - very helpful! That's a name from the past, I used to use Mark at West 4x4 for my original Ninety when I was at uni in Southampton, and always had superb service from him. I remember him turning me some custom wheel nuts once upon a time, as that Ninety was running some weird Australian alloys with special nuts that were impossible to find in this country...
|
||
22nd Jul 2018 6:32pm |
|
paulbrown22 Member Since: 23 Dec 2017 Location: London/Poole Posts: 352 |
Did you have the chain tensioner/guide upgrade done in the end - was it all successful and could you hear any difference afterwards? |
||
29th Aug 2018 9:07pm |
|
Nickiwi Member Since: 03 Aug 2017 Location: Southampton Posts: 10 |
I didn't in the end—I got a few estimates and they were all north of £3k, plus £850 for the supercharger spring that also needed attention. I decided I'd never see that money again, so reluctantly moved the vehicle on. First time in 10 years without a LR of some description. |
||
30th Aug 2018 10:13am |
|
paulbrown22 Member Since: 23 Dec 2017 Location: London/Poole Posts: 352 |
Sorry to hear that, thanks for letting me know though - very interesting to bear in mind!
|
||
30th Aug 2018 9:03pm |
|
Nickiwi Member Since: 03 Aug 2017 Location: Southampton Posts: 10 |
Thanks Paul.
|
||
31st Aug 2018 7:40am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis