Home > Technical (L322) > [SOLVED] Trailer power sockets? (Towing Dunce!) |
|
|
Joe90 Member Since: 29 Apr 2010 Location: Hampshire Posts: 6408 |
I have the OEM towbar.
|
||
12th May 2012 10:34am |
|
A1GSS Member Since: 24 Dec 2010 Location: Saffron Walden, Essex Posts: 1973 |
Aux power eg to caravan.
|
||
12th May 2012 10:49am |
|
Joe90 Member Since: 29 Apr 2010 Location: Hampshire Posts: 6408 |
Thank you .
|
||
12th May 2012 3:37pm |
|
Joe90 Member Since: 29 Apr 2010 Location: Hampshire Posts: 6408 |
Also, if you don't seem to have any power coming from the white socket, check 20 amp Fuse 76 in the rear fusebox.
|
||
11th Jan 2014 3:51pm |
|
appj62 Member Since: 07 Aug 2013 Location: Cheshire Posts: 424 |
On a 2006MY SC F20 (20Amp)is the permanent supply & F1 (15Amp) is one of the switched supplies. I bought the 12 S adaptor from Martin & connected it up to my CTEK, no joy. Found that the 20 Amp fuse had blown and replaced it. CTEK seemed to spring into life. Checked later and found fuse had blown again After much head scratching traced fault to 12 S socket. Found virtually a full earth (around 6 -7 ohms) between earth pin and permanent supply pin.
|
||
22nd Apr 2014 3:59pm |
|
Full Fat Ray Member Since: 23 Jan 2014 Location: Cwm Llinau Posts: 574 |
12N 12S pretty old hat now, and a cr p design of brass pins / tubes - they are always giving trouble, oftem connections go high resistance then when you are towing the van and the fridge is running the 12S plug / socket get hot.
|
||
22nd Apr 2014 4:50pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis