Hi I took the towbar and crossmember off my car today and just wanted to ask if the part shown in the photo is a part of the car or is it a part of the towbar assembly?

i'm not sure but i think a crash bar has to be re-fitted when you take off the tow bar..hopefully someone will confirm or dispel this... ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

Yep, you should have one or t’other

Click image to enlarge

Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated

Was that a yep to my post or Stan's post? Which of those parts in the diagram is what I have taken a photo of? Also do I need a crash bar as suggested by Stan? 2004 Range Rover Vogue 4.4 v8 LPG, Java Black, 22' Hawke Alloys, Black Beast

By the looks of it you have a Non OE tow bar fitted and you have only removed a portion of it. Then you would usually replace the original tow hooks...

List a pic of the part you have removed and then i can tell toy more sir

Hi here are pics of the tow bar parts removed from the car:

Definitely a non OE tow bar you have there sir... If you look at the pics RRPhil listed you can see the difference... You only need to remove the two side parts and replace the original tow eye bracket parts and you will be back to standard...

Bare in mind, without the original tow eye brackets you will be missing the rear tow eye... Don't know if that has any effect on your decision making process?

Ok bit of a snag there then as I have used that part to bolt my LPG filler cap to (as pictured).

My car never had a rear tow eye/hook when I bought it - what does one look like and is there any way I can still attach one to my car if I ever need to pull something?

Click image to enlarge

Also does a crash bar need to be fitted? (mentioned by someone earlier in the messages) 2004 Range Rover Vogue 4.4 v8 LPG, Java Black, 22' Hawke Alloys, Black Beast