I am trying to swap the oddments tray for the piece that is molded to take the phone holder. It has a hole in it which the gas strut for the cubby box lid passes through. How do I undo the strut at one end to fit this on?

Am I going to have to take half the centre console apart?

Cheers,
Mike

hi mike, been here and done it when i was fitting the blue tooth..went and bought the pin so i could see what way it did come out. what you need is an automatic centre punch , use it on the end closes to the passenger 1 or 2 clicks and it will fly out, don't tap it with a hammer as the holder is only cast alloy and can break..
as your are sitting in the driver seat,look at the pin, it comes out on the left , so if you pushed it out it would be going towards the drives seat.
have i made that clear...
daveo V8 facelift Range Rover Autobiography 22" wheels.
1976 Harley Davidson Iron Head Sportster

Ok, so it just presses out. Have some thing that might work for that. Thanks,

Presume it just pushes back in with a bit of effort?

hi, yes use a auto centre punch it will shock it out with ease V8 facelift Range Rover Autobiography 22" wheels.
1976 Harley Davidson Iron Head Sportster